800x600mm Fusion LED Illuminated Black Bathroom Mirror

800x600mm Fusion LED Illuminated Black Bathroom Mirror

Malmo LED Black Bathroom Mirror, Demister Pad, Cool White LEDs, Warm White LEDs, Frame Shelf

800x600 Malmo LED Illuminated Black Bathroom Mirror

450x600mm Belice LED Illuminated Bathroom Mirror

10
Year
Guarantee
£264.99
Due 06/10/2021
FREE UK Delivery
*UK Mainland Only
SKU
300.10.20
Mains Powered
  • This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
Demister Pad
  • Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation. 
  • Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
  • They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
  • Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
  • Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
  • Designed with maximum convenience and hygiene in mind.
  • The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
  • The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
Shaver Socket
  • All our shaver sockets support both 230V.
  • The shaver socket is activated once a shaver is plugged in.
  • It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
  • The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.

The 450x600mm Belice LED Mirror is the perfect solution for those looking for a practical yet stylish solution for your bathroom. The durable, glass shelf provides additional storage space that takes clutter away from the sink, whilst the built-in shaver socket and demister pad ensure that you can shave after a shower without having to wipe condensation away. Add a touch of luxury to your bathroom or ensuite with the Belice LED bathroom mirror, now available in two sizes. Glass shelf can be removed for cleaning or if unit is mounted landscape.

  • High-quality 5mm safety film backed clear glass
  • Demister pad to safely heat up the mirror surface to clear away steam after a shower or bath - activated by the lights
  • Infra-red sensor switch to activate lights - located on the right hand frame on the side of the mirror
  • Independent dual voltage 210V/240V shaver socket - located on left hand side
  • IP44 rated – Splash proof and suitable for use above a basin
  • Energy saving cool white LEDs
  • Mains Powered
    • This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
    Shaver Socket
    • All our shaver sockets support both 230V.
    • The shaver socket is activated once a shaver is plugged in.
    • It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
    • The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.
    Demister Pad
    • Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation. 
    • Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
    • They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
    Motion Sensor
    • Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
    • Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
    • Designed with maximum convenience and hygiene in mind.
    • The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
    • The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
    IP44 Rated
    • IP rating stands for 'ingress protection' and the numbers refer to the level of protection (from water, steam and dust).
    • All our mirrors are IP44 rated which means they can be installed anywhere within bathroom zones 2 or 3.
    • Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.
    • Zone 3 is anywhere outside zones 0, 1 & 2 and where no water is likely to be used.
    Wall Fixing
    • All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings available from:
      • Grip It (Recommended)
      • Screw Fix
      • Ironmongery Direct
    • Before installation, please make sure you check the weight of your item so you are able to find the correct fixings applicable to support the item on your chosen wall. If you are unsure of the fixings you need for your item, please contact a qualified electrician.
    • The item must be installed following the fitting instructions supplied with your item.
    More Information
    SKU 300.10.20
    Weight (kg) 10
    IP Rating IP44
    Light Colour Cool White
    Glass Thickness (mm) 5
    CE and RoHS Certified Yes
    Standard Guarantee (years) 1
    Lighting Style LED Dots
    Installation Type Back Box
    Extendable Guarantee (Years) 10
    Switch Location Right Bottom
    More Information
    Packaging Material 100% Renewable and/or Recycled
    Switch Type Motion Sensor
    Lumens (lm) 266
    Kelvins (k) 6000
    Width (mm) 450
    Height( mm) 600
    Depth (mm) 60
    Demister Size (mm) 230x300
    Packaging Dimensions (mm) 705(H) x 540(W) x 135(D)
    Energy Efficiency Rating (EPC) A - A++
    Customer Questions
    Do all your mirrors and cabinets come with all the necessary wall fixings?

    All mirrors and cabinets come complete with fixings if you are planning on installing the mirror onto a solid wall. If your wall is plasterboard, we recommend that 'Redi-Driver' and/or 'Gripit' fixings are bought to fix securely to a wall of this type.

    Is the demister pad energy efficient?

    Our illuminated and LED mirrors and cabinets are uniquely manufactured and designed using energy-saving components to maintain a low running cost, so you do not have to worry about leaving the demister pad constantly active.

    How do I activate or deactivate the demister pad?

    The demister pad is controlled by your mirror or cabinet's light switch, (either an infra-red sensor switch or a touch switch) and will be active when the lights are on. 

    Do the lights need to be on in order to use the shaver socket?

    No the lights do not need to be active to use the shaver socket. Our items are all fitted with isolating transformers and conform to British Standards, which means the the shaver socket feature only uses power when a shaver or toothbrush is plugged into it, perfect for low running costs and overnight use in the bathroom.

    Please, mind that only logged in users can submit questions
    Attach

    All our units come complete with a full installation guide and fixings suitable for solid walls. Installation guides can be downloaded below.

    Top Tips!
    Check Packaging

    As soon as you recieve your product please unpack and check that your product and all contents are included.

    Mirrors & Cabinets with Motion Sensors

    On installation the motion sensor must be located a minimum of 150mm away from any object, surface or tile trim.

    Professional Fitting

    Suitable for both solid walls and plasterboard, we recommend using a professional fitter for installation.

    M2_PG_PP_DesignedInBritain_1
    M2_PG_PP_EnergyEfficient_Icon_1

    Energy Saving LEDs

    All of our illuminated mirrors and cabinets use energy efficient LEDs with a typical lifespan of 120,000 hours.

    M2_PG_PP_IP44_Icon_1

    IP44 Bathroom Rated

    All of our products adhere to the IP44 rating allowing them to be installed within the IEE Wiring Regulations Zone 2.

    M2_PG_PP_Fitting_Icon_1

    Plasterboard Friendly

    All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings.

    Fast Free Delivery
    Available to UK Mainland

    Dispatched Same Day
    Order by 3pm Mon-Thu. 2pm Fri

    UK Customer Care Team  
    Expert advice 01977 522021

    365 Day Exchange  
    Hassle-free exchange policy

    Fast Free Delivery
    Available to UK Mainland

    Dispatched Same DayOrder by 3pm Mon-Thu. 2pm Fri.


    Available to UK Mainland


    Order before 3pm Mon-Thu. 2pm Fri.

      
    Expert advice on 01977 522021

      
    Hassle-free exchange policy

    UK Customer Care Team
    Hassle-free exchange policy

    365 Day Exchange
    Expert advice on 01977 522021