Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror
Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in each product's details
They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
for the best results please make sure your bathroom has sufficient ventilation
Infrared on/off sensor switch detects movement within a 5cm detection range.
Designed with maximum convenience and hygiene in mind.
Simply swipe your hand across the sensor to turn on and off.
The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
The shaver socket is activated once a shaver is plugged in.
It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.
Our Hadley LED Cabinet features ample storage space, with three adjustable glass shelves. Bright diable overhead lighting for applying make-up or shaving, combined with soft under-cabinet light make this unit a beautiful light source at any time of day. Packed with innovative features such as an infra-red sensor switch, demister pad and a shaver socket, the Hadley is a practical and stunning centerpiece for your bathroom.
IP44 rated – Splash proof and suitable for use above a basin
Energy saving cool white LEDs
This cabinet features a dimmable overhead LED lamp and ambient strip lighting located underneath the cabinet
To dim the lights, use the infra-red sensor switch on the underneath of the cabinet. Hold your hand under the sensor until you reach the desired brightness
Demister pad to safely heat up the mirror surface to clear away steam after a shower or bath - activated with a rocker switch inside the cabinet
Infra-red sensor switch to activate lights - located underneath the cabinet on the right-hand side
Independent dual voltage 110V/240V shaver socket - located on the inside of the cabinet at the top
The shaver socket is activated once a shaver is plugged in.
It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.
Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror
Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in each product's details
They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
for the best results please make sure your bathroom has sufficient ventilation
Infrared on/off sensor switch detects movement within a 5cm detection range.
Designed with maximum convenience and hygiene in mind.
Simply swipe your hand across the sensor to turn on and off.
The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
IP rating stands for 'ingress protection' and the numbers refer to the level of protection given to electrical components (from water, steam and dust).
All our illuminated mirrors are IP44 rated which means they can be installed anywhere within bathroom zones 2 or 3.
Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.
Zone 3 is anywhere outside zones 0, 1 & 2 and where no water is likely to be used.
All our non-illuminated mirrors are designed for bathroom use but no IP rating is needed, as electrical components are not featured.
All Pebble Grey mirrors and cabinets can be installed onto solid walls as well as plasterboard walls (as per the fitting instructions supplied with your item). For plasterboard, we recommend using a variety of suitable fixings including GripIts, which are available from most hardware shops and Amazon.co.uk.
Before installation, please make sure you check the weight of your item so you are able to find the correct fixings to support the item on your chosen wall. If you are unsure of the fixings you need for your item, please contact a qualified electrician.
Once you've completed your order, all you have to do to activate your free 10 year extended guarantee is complete a quick and easy online registration formComplete the online form (it'll take no longer than 2 minutes) and submit to activate the cover...
Do all your mirrors and cabinets come with all the necessary wall fixings?
All mirrors and cabinets come complete with fixings if you are planning on installing the mirror onto a solid wall. If your wall is plasterboard, we recommend that 'Redi-Driver' and/or 'Gripit' fixings are bought to fix securely to a wall of this type...
Can we change the opening of the cabinet from left side to right side, or visa versa?
Unfortunately not, as this will void your product warranty. We do however, have a good selection of left-side opening and right-side opening cabinets to choose from.
How much does delivery cost?
This item is eligible for FREE 2-3 day delivery to any UK Mainland address. Order before 4pm Monday - Friday to get same-day dispatch. If you do not meet this cut-off time on any given day, your goods will be dispatched the following day. Orders placed...
Will my cabinet arrive fully assembled?
Yes, all our cabinets will arrive with you securely packaged and fully assembled. We design all of our items with easy installation in mind. The item will just need to be fixed in place, wired in, and shelf brackets and shelves slotted internally at...
Do the lights need to be on in order to use the shaver socket?
No the lights do not need to be active to use the shaver socket. Our items are all fitted with isolating transformers and conform to British Standards, which means the the shaver socket feature only uses power when a shaver or toothbrush is plugged ...
How do I activate or deactivate the demister pad?
Our built-in demister pads are controlled by your mirror or cabinet's light switch (either an infra-red sensor switch or a touch switch). The demister pad will be active when the lights are on, then simply turn off the mirror to turn off both the lights...
Is it possible to override my mirror or cabinet's switch and wire the item to the bathroom lighting circuit?
We do not recommend this as it will void your product warranty and you will not be able to claim if your item develops a fault, however it is possible to wire your mirror or cabinet to the main bathroom lighting circuit, so that the lights turn on and...