- This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
500x700mm Atlanta LED Illuminated Bathroom Mirror Cabinet
10
Year
Guarantee
Regular Price
£429.99
£249.99
You Save
£180.00
Availability:
In stock
FREE UK Delivery
*UK Mainland Only
SKU
500.20.13
Mains Powered
Demister Pad
- Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation.
- Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
- They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
- Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
- Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
- Designed with maximum convenience and hygiene in mind.
- The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
- The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
Shaver Socket
- All our shaver sockets support both 230V.
- The shaver socket is activated once a shaver is plugged in.
- It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
- The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.
The striking Atlanta LED cabinet has the latest LED technology, making this cabinet extremely energy efficient. With a modern design, built-in shaver socket, demister pad, infra-red sensor and two internal shelves the cabinet is the ultimate in convenience and a stunning finishing touch to your bathroom.
Mains Powered
- This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
Shaver Socket
- All our shaver sockets support both 230V.
- The shaver socket is activated once a shaver is plugged in.
- It is an independent feature allowing you to charge your shaver in the socket overnight without the need to have the lights constantly active
- The shaver sockets use isolating transformers that isolate the supply from the mains and conform to current British Standards, making our illuminated mirrors safe and ideal for bathroom use. For use with most electric toothbrushes.
Demister Pad
- Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation.
- Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
- They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
- Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
- Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
- Designed with maximum convenience and hygiene in mind.
- The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
- The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
IP44 Rated
- IP rating stands for 'ingress protection' and the numbers refer to the level of protection (from water, steam and dust).
- All our mirrors are IP44 rated which means they can be installed anywhere within bathroom zones 2 or 3.
- Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.
- Zone 3 is anywhere outside zones 0, 1 & 2 and where no water is likely to be used.
Wall Fixing
- All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings available from:
- Grip It (Recommended)
- Screw Fix
- Ironmongery Direct
- Before installation, please make sure you check the weight of your item so you are able to find the correct fixings applicable to support the item on your chosen wall. If you are unsure of the fixings you need for your item, please contact a qualified electrician.
- The item must be installed following the fitting instructions supplied with your item.
Fully Assembled
- This product comes fully assembled and does not require any build
| SKU | 500.20.13 |
|---|---|
| Weight (kg) | 18 |
| Doors | 1 |
| Double Mirrored Door | Yes |
| Side Material | Mirrored Glass |
| ROHS_CE | Yes |
| Glass Thickness (mm) | 5 |
| IP Rating | IP44 |
| Light Colour | Cool White |
| Lighting Style | Diffused LED |
| Extendable Guarantee | 10 |
| Cable Entry Point | Top of the cabinet |
| Standard Guarantee (years) | 1 Year |
| Packing Material | 100% Renewable & Recycled |
|---|---|
| Product Material | Aluminium |
| Switch Location | Bottom right |
| Switch Type | Motion Sensor |
| Lumens (lm) | 811 |
| Kelvins (k) | 6400 |
| Width (mm) | 500 |
| Height( mm) | 700 |
| Depth (mm) | 120 |
| Demister Size (mm) | 200x400 |
| Packaging Dimensions (mm) | 655(H) x 880(W) x 250(D) |
| Energy Efficiency Rating (EPC) | A - A++ |
Customer Questions
Our customers love to show off their bathroom with pride. Simply submit your photo using the upload button here.
All our units come complete with a full installation guide and fixings suitable for solid walls. Installation guides can be downloaded below.
Top Tips!
Check Packaging
As soon as you recieve your product please unpack and check that your product and all contents are included.
Mirrors & Cabinets with Motion Sensors
On installation the motion sensor must be located a minimum of 150mm away from any object, surface or tile trim.
Professional Fitting
Suitable for both solid walls and plasterboard, we recommend using a professional fitter for installation.
Energy Saving LEDs
All of our illuminated mirrors and cabinets use energy efficient LEDs with a typical lifespan of 120,000 hours.
IP44 Bathroom Rated
All of our products adhere to the IP44 rating allowing them to be installed within the IEE Wiring Regulations Zone 2.
Plasterboard Friendly
All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings.
Available to UK Mainland*
Order before 3pm Mon-Thu. 2pm Fri.
Expert advice available 01977 522021
Hassle-free exchange policy