600x600mm Halo LED Illuminated Bathroom Mirror

600x600mm Halo LED Illuminated Bathroom Mirror

600x600mm Halo Noir LED Illuminated Bathroom Mirror

10
Year
Guarantee
£199.99
Due 20/11/2020
FREE UK Delivery
Order by 3pm. UK Mainland Only.
SKU
701.01.03
Mains Powered
  • This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
Demister Pad
  • Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation. 
  • Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
  • They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
  • Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
  • Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
  • Designed with maximum convenience and hygiene in mind.
  • The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
  • The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.

Add a contemporary touch to your space with our brand new stylish black framed Halo Noir LED Illuminated Mirror. Create an instant focal point with a stunning bright LED light encased in a modern black trim for a chic industrial feel. This on-trend mirror also comes with an array of useful features including a demister pad for a perfectly clear reflection from the moment you step out of the shower and a motion sensor to activate your lights without touching the glass.

  • High-quality 5mm safety film backed clear glass
  • Demister pad to safely heat up the mirror surface to clear away steam after a shower or bath - activated by the lights
  • Infra-red sensor switch to activate lights - located on the underneath of the mirror
  • IP44 rated – Splash proof and suitable for use above a basin
  • Energy saving cool white LED
  • Mains Powered
    • This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
    Demister Pad
    • Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation. 
    • Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
    • They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
    Motion Sensor
    • Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
    • Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
    • Designed with maximum convenience and hygiene in mind.
    • The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
    • The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
    IP44 Rated
    • IP rating stands for 'ingress protection' and the numbers refer to the level of protection (from water, steam and dust).
    • All our mirrors are IP44 rated which means they can be installed anywhere within bathroom zones 2 or 3.
    • Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.
    • Zone 3 is anywhere outside zones 0, 1 & 2 and where no water is likely to be used.
    Wall Fixing
    • All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings available from:
      • Grip It (Recommended)
      • Screw Fix
      • Ironmongery Direct
    • Before installation, please make sure you check the weight of your item so you are able to find the correct fixings applicable to support the item on your chosen wall. If you are unsure of the fixings you need for your item, please contact a qualified electrician.
    • The item must be installed following the fitting instructions supplied with your item.
    Fully Assembled
    • This product comes fully assembled and does not require any build
    More Information
    SKU 701.01.03
    IP Rating IP44
    ROHS_CE Yes
    Standard Guarantee (years) 1
    Lighting Style Diffused LED
    Installation Type Hanging Brackets
    Extendable Guarantee 10
    Switch Location Bottom Middle
    More Information
    Packing Material 100% Renewable and/or Recycled
    Switch Type Motion Sensor
    Kelvins (k) 6400
    Width (mm) 600
    Height( mm) 600
    Depth (mm) 0
    Energy Efficiency Rating (EPC) A - A++
    Customer Questions
    Do all your mirrors and cabinets come with all the necessary wall fixings?

    All mirrors and cabinets come complete with fixings if you are planning on installing the mirror onto a solid wall. If your wall is plasterboard, we recommend that 'Redi-Driver' and/or 'Gripit' fixings are bought to fix securely to a wall of this type.

    Please, mind that only logged in users can submit questions
    Attach

    All our units come complete with a full installation guide and fixings suitable for solid walls. Installation guides can be downloaded below.

    Top Tips!
    Check Packaging

    As soon as you recieve your product please unpack and check that your mirror and all contents are included.

    Allow 15cm clearance

    The motion sensor must be placed a minimum of 150mm away from any object, surface or tile trim.

    Professional Fitting

    Suitable for both solid walls and plasterboard, we recommend using a professional fitter for installation.

    Energy Saving LEDs

    All of our illuminated mirrors and cabinets use energy efficient LEDs with a typical lifespan of 120,000 hours.

    IP44 Bathroom Rated

    All of our products adhere to the IP44 rating allowing them to be installed within the IEE Wiring Regulations Zone 2.

    Plasterboard Friendly

    All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings.

     Available to UK Mainland*

     Order before 3pm Mon-Thu. 2pm Fri.

      
    Expert advice available 01977 522021

      
    Hassle-free exchange policy