- This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
800x600mm Bluetooth Adara LED Illuminated Bathroom Mirror
10
Year
Guarantee
£424.99
Due 09/07/2021
FREE UK Delivery
*UK Mainland Only
SKU
500.40.13
Bluetooth Speakers
- Connect your bluetooth device with ease to stream your music to the built-in speakers
- Waterproof high quality Meiloon 8W branded speakers
- Providing excellent sound quality in your bathroom
Mains Powered
Demister Pad
- Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation.
- Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
- They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
- Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
- Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
- Designed with maximum convenience and hygiene in mind.
- The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
- The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
The beautiful Adara Mirror produces an ambient glow, which illuminates both sides of the mirror. This stunning mirror has the latest audio technology, as well as an innovative infra-red sensor switch and demister pad, ideal for bringing a touch of luxury to your bathroom.
Mains Powered
- This mirror/cabinet needs to be connected to the mains electricity in your bathroom (not battery powered)
Demister Pad
- Our demister pads work by gently heating the mirror surface to a high enough temperature to prevent condensation and reduce foggy appearance in the mirror, for the best results please make sure your bathroom has sufficient ventilation.
- Demister pads can be activated by either the infra-red sensor, touch switch or rocker switch. This will be listed in the product information
- They are extremely energy efficient and made with eco-friendly components to maintain a low running cost and a low impact on the environment
Motion Sensor
- Innovative infrared on/off sensor switch detects movement within a 5cm detection range.
- Simply swiping your hand across the sensor will turn the light on and swiping your hand back across the sensor will turn the light off.
- Designed with maximum convenience and hygiene in mind.
- The sensor can be bypassed and instead you can connect straight to mains for activation by a pull cord alongside your other bathroom lighting.
- The sensor requires a space of at least 15cm between the sensor switch and an adjacent object/surface to avoid any interference and to allow the sensor switch to work to its full ability.
IP44 Rated
- IP rating stands for 'ingress protection' and the numbers refer to the level of protection (from water, steam and dust).
- All our mirrors are IP44 rated which means they can be installed anywhere within bathroom zones 2 or 3.
- Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor.
- Zone 3 is anywhere outside zones 0, 1 & 2 and where no water is likely to be used.
Wall Fixing
- All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings available from:
- Grip It (Recommended)
- Screw Fix
- Ironmongery Direct
- Before installation, please make sure you check the weight of your item so you are able to find the correct fixings applicable to support the item on your chosen wall. If you are unsure of the fixings you need for your item, please contact a qualified electrician.
- The item must be installed following the fitting instructions supplied with your item.
Bluetooth Speakers
- Connect your bluetooth device with ease to stream your music to the built-in speakers
- Waterproof high quality Meiloon 8W branded speakers
- Providing excellent sound quality in your bathroom
| SKU | 500.40.13 |
|---|---|
| Weight (kg) | 9 |
| IP Rating | IP44 |
| Light Colour | Cool White |
| Glass Thickness (mm) | 5 |
| CE and RoHS Certified | Yes |
| Lighting Style | Diffused LED |
| Installation Type | Hanging Brackets |
| Extendable Guarantee (Years) | 10 |
| Switch Location | Bottom right |
| Switch Type | Motion Sensor |
|---|---|
| Lumens (lm) | 984 |
| Kelvins (k) | 6400 |
| Width (mm) | 800 |
| Height( mm) | 600 |
| Depth (mm) | 55 |
| Demister Size (mm) | 300x300 |
| Packaging Dimensions (mm) | 920(H) x 720(W) x 150(D) |
| Energy Efficiency Rating (EPC) | A - A++ |
Customer Questions
Our customers love to show off their bathroom with pride. Simply submit your photo using the upload button here.
All our units come complete with a full installation guide and fixings suitable for solid walls. Installation guides can be downloaded below.
Top Tips!
Check Packaging
As soon as you recieve your product please unpack and check that your product and all contents are included.
Mirrors & Cabinets with Motion Sensors
On installation the motion sensor must be located a minimum of 150mm away from any object, surface or tile trim.
Professional Fitting
Suitable for both solid walls and plasterboard, we recommend using a professional fitter for installation.
Energy Saving LEDs
All of our illuminated mirrors and cabinets use energy efficient LEDs with a typical lifespan of 120,000 hours.
IP44 Bathroom Rated
All of our products adhere to the IP44 rating allowing them to be installed within the IEE Wiring Regulations Zone 2.
Plasterboard Friendly
All Pebble Grey mirrors and cabinets can be installed onto plasterboard walls using a variety of suitable fixings.
